Home
Service & Retail Locator
Service & Support
Search
16 Ga Galvanized Standard Crown (1/2″) Staples

16 Ga Galvanized Standard Crown (1/2″) Staples

SUPERIOR DRIVE THAT HELPS ENSURE FEWER JAMS AND MORE STAPLING.
Our industry leading staples are designed and manufactured to match the specs of Paslode staplers so your stapler will run smoothly, with fewer misfires and jams while driving flush, even into the toughest materials.

Staples built to last as long as your work.

  • Galvanized for corrosion protection
  • Extra strong strips won’t fall apart if dropped

Where to Buy
  • Product Information
  • Related Products
  • FAQ'S

Product Information

Specs

Length 3/4" - 2"
Wire 16 Gauge
Finish Galvanized
Quantity 7,500 - 21,000/Carton
Part #LengthWireCrownFinish#/Carton
0T5240 3/4" 16 Gauge 1/2"Galvanized21,000
0T52421" 16 Gauge 1/2"Galvanized16,500
0T52431 1/8" 16 Gauge 1/2"Galvanized 15,000
0T52381 1/4" 16 Gauge 1/2"Galvanized13,500
0T26951 1/2" 16 Gauge 1/2"Galvanized10,500
0T22501 3/4" 16 Gauge 1/2"Galvanized9,000
0T22582" 16 Gauge 1/2"Galvanized7,500

Product Documentation


Staples and Brads Fasteners SDS

Related Products

Cordless 16 Ga Stapler

View Product

FAQ’s

Can I use Paslode galvanized finish nails in an exterior application?

Paslode finish nails are electro-galvanized. They should not be used in cedar, redwood or treated lumber. If they are going to be used in pine then they should be countersunk and the heads should be caulked over.

Can I use Paslode Hot Dipped Galvanized nails in ACQ treated lumber?

Paslode Hot Dipped Galvanized and Paslode Galvanized Positive Placement Metal Connector Nails meet the ASTM A153 Class D specifications (1 oz/ft2 of zinc coverage) for use in ACQ treated lumber.

Does Paslode manufacture Stainless Steel fasteners?

No, Paslode does not manufacture stainless steel 30 degree fasteners. You may do a search on a search engine, such as Google, typing in “30 degree stainless steel fasteners”.

Does Paslode offer a full head nail?

Yes, Paslode manufactures coil nails which are full round head nails and Roundrive; strip nails that are full offset head nails. Paslode’s patented Roundrive; fasteners are designed to work with our 30 Degree framing nailers, both the Pneumatic 30 Degree Framing nailer and the Cordless 30 Degree nailer. Fasteners can be purchased through our retail and distribution channels. To find a Paslode dealer click the ‘Where to Buy’ tab on the top of the Paslode homepage.

How do I find a Paslode Authorized Service Center?

To locate your nearest service location, click on “Service and Retail Locator" at the top of the page and then enter your zip code.  Paslode recommends that tools needing service be repaired through your local Factory Authorized Service Network.

How do I order a part online?

Genuine Paslode replacement parts, tune up kits, accessories, and repair service can be purchased online at itwconstructionparts.com.

What are the shear and pullout strengths of Paslode fasteners?

The ES Report-1539 contains information on the shear and pullout strengths of Paslode fasteners. A copy of the report is located here: ESR-1539.pdf.