Home
Service & Retail Locator
Service & Support
Search
HardieNail™ - Studless Siding Fastener with tetraGRIP™ Fastening Technology

HardieNail™ - Studless Siding Fastener with tetraGRIP™ Fastening Technology

The HardieNail Siding Fastener is a 304 Stainless Steel 1-1/8" x .117" fastener. The shorter fastener prevents unintended damage to Electrical, Plumbing and HVAC lines hidden behind sheathing. It also features a large .300" Head for maximum holding power.

  • Why It Works Better - The revolutionary tetraGRIP™ technology barbed helix design of the HardieNail™ Studless Siding Fastener drives as fast as a nail and has the holding power of a screw.
  • Rotation Bonds Nail to Wood - Mechanically bonds with the wood fibers for superior holding power.
  • Strong Non-Destructive Wood Interaction - Efficient rotation helps eliminate wood destruction common in standard ring shank nails.
  • Superior Withdrawal Resistance - The barbed helix-to-wood engagement creates a high load capacity and does not require a nail-to-stud interaction.

Where to Buy
  • Product Information
  • Related Products
  • FAQ'S

Product Information

HardieNail™ Studless Fastening System Featuring Paslode tetraGRIP™ Fastening Technology

The HardieNail Studless Siding Fastening System is a new innovative method for quickly and securely installing James Hardie fiber cement siding. The HardieNail features Paslode's patented tetraGRIP™ fastening technology, which allows siding installers to fasten directly to OSB sheathing. Fastening to a stud is not required. With the HardieNail fastener, HardiePlank siding can be installed 20% faster on average.* This fastener simplifies the installation process and saves time by eliminating the time needed to locate and mark studs, and to measure and cut planks to land on studs. The HardieNail tetraGRIP™ Siding Fastening System is a technological breakthrough for James Hardie fiber cement siding siding installers. With its dedicated pneumatic coil nailer, the tetraGRIP™ Siding Fastening System drives as fast as a nail and has the holding power of a screw. Fast, secure installation without fastening to studs. * Average reduction in HardiePlank Siding installation time compared to using standard nails and pneumatic nailing. Complicated architecture, experience or site conditions can impact efficiency, creating some limitations to average install reduction time.

Specs

Part # 650867
Length 1-1/8"
Diameter .117"
Fastener Type 0˚ Coil Siding Nail
Fastener Finish 304 Stainless Steel
Head Size Full Round Head - 0.300"
Collation Angle 0˚
Nails per coil 120 Nails
Coils per carton 30 Coils
Nails per carton 3,600 Nails

Product Documentation


HardieNail™ Studless Siding Fastener User Guide

HardieNail™ Studless Siding Fastener Technical Data Sheet

Paslode - HardieNail™ Studless Siding Fastener Program

HardieNail™ Studless Fastening System Featuring Paslode tetraGRIP™ Fastening Technology

The HardieNail Studless Siding Fastening System is a new innovative method for quickly and securely installing James Hardie fiber cement siding. The HardieNail features Paslode's patented tetraGRIP™ fastening technology, which allows siding installers to fasten directly to OSB sheathing. Fastening to a stud is not required. This fastener simplifies the installation process and saves time by eliminating the time needed to locate and mark studs, and to measure and cut planks to land on studs. The HardieNail tetraGRIP™ Siding Fastening System is a technological breakthrough for James Hardie fiber cement siding siding installers. With its dedicated pneumatic coil nailer, the tetraGRIP™ Siding Fastening System drives as fast as a nail and has the holding power of a screw. Fast, secure installation without fastening to studs. * Average reduction in HardiePlank Siding installation time compared to using standard nails and pneumatic nailing. Complicated architecture, experience or site conditions can impact efficiency, creating some limitations to average install reduction time.

Related Products

FAQ’s

Can I use Paslode galvanized finish nails in an exterior application?

Paslode finish nails are electro-galvanized. They should not be used in cedar, redwood or treated lumber. If they are going to be used in pine then they should be countersunk and the heads should be caulked over.

Can I use Paslode Hot Dipped Galvanized nails in ACQ treated lumber?

Paslode Hot Dipped Galvanized and Paslode Galvanized Positive Placement Metal Connector Nails meet the ASTM A153 Class D specifications (1 oz/ft2 of zinc coverage) for use in ACQ treated lumber.

Does Paslode manufacture Stainless Steel fasteners?

No, Paslode does not manufacture stainless steel 30 degree fasteners. You may do a search on a search engine, such as Google, typing in “30 degree stainless steel fasteners”.

Does Paslode offer a full head nail?

Yes, Paslode manufactures coil nails which are full round head nails and Roundrive; strip nails that are full offset head nails. Paslode’s patented Roundrive; fasteners are designed to work with our 30 Degree framing nailers, both the Pneumatic 30 Degree Framing nailer and the Cordless 30 Degree nailer. Fasteners can be purchased through our retail and distribution channels. To find a Paslode dealer click the ‘Where to Buy’ tab on the top of the Paslode homepage.

How do I find a Paslode Authorized Service Center?

To locate your nearest service location, click on “Service and Retail Locator" at the top of the page and then enter your zip code.  Paslode recommends that tools needing service be repaired through your local Factory Authorized Service Network.

How do I order a part online?

Genuine Paslode replacement parts, tune up kits, accessories, and repair service can be purchased online at itwconstructionparts.com.

What are the shear and pullout strengths of Paslode fasteners?

The ES Report-1539 contains information on the shear and pullout strengths of Paslode fasteners. A copy of the report is located here: ESR-1539.pdf.