Fastener Compliance

Paslode RounDrive™, clip head nails (D-head) and concentric full head are recognized by ICC Evaluation Service, Inc. See ICC Evaluation Service Inc. Reports Numbered ESR-1539 and ESR 3072 for allowable values and /or conditions of use concerning material presented in these documents. All ICC Evaluation Services reports are subject to re-examination, revisions, and possible closings.  ICC evaluation reports advise of compliance to model codes supported by IRC and IBC.

Paslode Positive Placement® metal connector nails are ICC-ES recognized per ESR-2126 and ESR-3326. See each specific report for allowable values and/or conditions of use concerning material or services presented in the documents.

Paslode TetraGrip® fasteners are ICC-ES recognized per ESR-3071. See that report for allowable values and/or conditions of use concerning material or services presented in the documents.

Paslode staples and nails are manufactured from materials to tolerances in compliance with ASTM Designation F 1667, “Standard Specification for Driven Fasteners: Nail, Spikes and Staples”. Paslode nails conform to the Supplementary Requirements of ASTM F1667 and can be classified and labeled as “Engineered Construction Nails, ASTM 1667”.

Paslode hot dipped galvanized corrosion resistant fasteners are zinc coated and comply with ASTM F1667. Paslode hot dipped galvanized nails meet zinc coating weight requirements of ASTM A153 Class D.

 

Updated 5/23/17