Go to:
Specifications
Fasteners
Schematic
Accessories

 

  
Extend Bumper Life– tested to over 600,000 cycles without failure. More than three times the life of ordinary bumpers.
Distinct Bumper Geometry– for consistent low pressure return during rapid fire. Drive up to 12 fasteners per second.
Improved Upper Piston Valve– virutally eliminates valve seizure even under adverse environmental conditions such as dust, high heat and humidity.
Tool-less Quick Clear– removes jams quickly and easily
Top Load Magazine–- Loads easily, reduced fastener waste
Adjustable Shingle Guide– Keeps roofing shingles straight and properly aligned
Adjustable shingle guide provides versatility
Reinforced Carbide Tip Nose resists abrasion

Use this tool for:
(keywords)
Roofing Shingles
Wire Lathing
Insulation Sheathing
Polystyrene Sheathing
Housewrap
Insulation



 

Specifications
Model: S150-W16R
Part Number: 501270
Weight: 4.9 lbs.
Height: 9.5"
Cycle Rate: 12 fasteners/sec.
Staple Capacity: 150
Air Req./100 p.s.i. (6.9 bar): .040/cycle
Op. Pres. p.s.i. (bar): 80-120

Fasteners:
16 Gauge Wide Crown Staples, Galvanized

Click here to find all fasteners for this product.
Click here for fastener code compliance letter.

Click here to download a Pneumatic Tool Operating Manual You will need Adobe Acrobat Reader.

Schematic:
Download Schematic! You will need Adobe Acrobat Reader.





Insulation Sheathing Stapler - S200-W16

Framing Stapler - S200-S16

Cordless 16 ga. Standard Crown Stapler





 
© 1999 Paslode®, An Illinois Tool Works Company. All rights reserved.